제품정보

DBR Technical Datasheet
  •  
  • DBR Technical Datasheet
  •  
  •  
  • Non-frequency crossed by 1:1 communication
  • Stable grip design for easy to operating
  • Customized functional buttons
  • Controller Area Network (CAN) applied
  • Certificate of Broadcasting and Communication Equipments
  •  
  •  
  •  DBR is an wireless remote controller for special vehicle such as aerial platform vehicle, sky-lift vehicle that operating vehicle remotely with 1 of jog-lever,12 of functional buttons and optional emergency stop switch.
  • Specifications for Transmitter

    Item Specification Remark
    Funtions up to 12x Customized
    Special Features

    1x Jog-Lever
    1x Emergency Stop

    Optional
    Wireless Bluetooth V4.1  
    Battery 2x AA Ni-MH 2,600mAh  
    Battery Duration up to 8 hours  
    Waterproof IP65  
    Operating Temp. -30~+80 celsius  
    Dimensions W55 x H215 x D52 (mm)  
    Weight 200g  
    Recharging 5Vdc  
    Certificate no. R-R-dAs-DBR-T  
    • Optional wired remote transmitter is available.

     

     

     

    Specifications for Receiver

    Item Specification Remark
    Output CAN  
    Power Source 10 ~ 30Vdc  
    Dimensions W82 x H66 x D45 (mm) Without Antenna
    Waterproof IP65  
    Operating Temp. -30~+80 celsius  
    Certificate no. R-R-dAs-DBR-R  

    Trnasmitter Layout (for aerial platform)

    1) Derrick Up/Down
    2) Boom Drawing/Withdrawing
    3) Rotating CW/CCW
    4) Basket Up/Down
    5) Basket tilting ON/OFF
    6) Engine Start/Stop
    7) Emergency Stop
    8) Transmitter ON/OFF
    9) Indicators

    Operating by the jog-lever after choosing each functions. Without any input during a while then transmitter is automatically powered off.

    [Insert user logo in the bottom margin.]

     

     

     

    Wiring Connections

      Color Description
    DBR-R RED V+
    BLACK GND
    GREEN CAN H
    WHITE CAN L
    • The receiver of DWR is wired by MG610331-5 plug (Korea Electric Terminal Co., Ltd.).

     

     

     

    NOTES

    • CAN network between the receiver and the equipment is required as IRON series operates equipments by CAN from the receiver.
    •  

    • Receiver harness must be wired along the structure of the equipment to avoid any damages.
    •  

    • Do not weld any to equipment during receiver harness is wired.
    •  

    • Check wiring connections before use.
    •  

    • 12 months warranty is provided after released. Warranty provided only in case of using for designed purpose correctly.
    •  

    • Specifications, design and components can be changed without prior notice to improve its performances.
    •  

       

       

    Copyright ⓒ 2018 (주)다스. All rights Reserved