제품정보

DIGIANGLE-VW Technical Datasheet
  •  
    • DIGIANGLE-VW Technical Datasheet
  •  
  •  
  • Power supplying for sensors to convenient use
  • VW sensors 3 channels + thermistor 1 channel at once
  • High strength aluminium housing
  • Low-power LCD display and automatic power saving
  •  
  •  
  •  Digital indicator DIGIANGLE-VW is for measuring VW-type of sensors such as loadcell, piezometer, strain gauge, vibrating-wire sensor.

    • 다운로드

    Specifications

    Item Specifications Remarks
    Measuring Range 450 ~ 6,000㎐  
    Channels VW 3ch + Temp. ch  
    Resolution 0.01Hz  
    Temp. Resolution 0.1℃  
    Non-Linearity 0.01% FS  
    Battery 3.7V 500mAh (Li-ion)  
    Charging Power USB 5V 500mA  
    Operating Temp. 0℃ ~ +65℃  
    Dimensions W110 x D80 x H32㎜  
    Weight 430g  
    • Temperature channel input : Thermistor 3㏀

     

     

     

    Measuring Modes

    • MODE [A] : Full sensor
      = Hz (450~6,000Hz bandwidth)
    • MODE [B] : Load gauge and piezometer
      = Hz^2x10^-3x4.062 (1,200~3,500Hz bandwidth)
    • MODE [C] : Surface-attached strain gage
      = Hz^2x10^-3x4.062 (450~1,000Hz bandwidth)
    • MODE [D] : Buried type strain gage
      = Hz^2x10^-3x3.304 (450~1,000Hz bandwidth)
    • MODE [E] : Spot welding type strain gauge
      = Hz^2x10^-3x4.062 (1,000~3,500Hz bandwidth)

     

     

     

    Wiring Connections

     

     

     

    Recharging

    • Recharge DIGIANGLE through the USB port on the rear by connecting USB-A to A cable (provided basically) to PC or USB recharger.

     

     

     

    Accessories

     

    • Leather pouch with shoulder strap
    • USB-A to A cable (2.0m)

    Instructions

    A
    		   Push △ button to change 1-channel- measurement or 3-channels-measurement.
    B
    		   Push □ button long to power on and off.
    C
    		   Push ▽ button to change mode [A] to [E]. Push △ + ▽ buttons at once long to turn LCD backlight on and off.
    1
    		   Shows current channel number. In 3-channel measurement, the measurement values of 3 channels are displayed, such as 1-1. SUM mode and Average mode are displayed.
    2
    		   Shows current value of the channel.
    3
    		   Shows current measuring mode.
    4
    		   Shows battery status. C mark is appeared during recharging.
    5
    		   Shows measured temperature from the channel.
    6
    		   Shows the result from the channel or average value at 3-channels-measurement.

     

    • Measures automatically every 3 seconds after the powered on.
    • Power saving : Over 3 minutes without any command then power is off automatically.

     

     

     

    Ordering Code

    1D Digital Ptotractor
    MULTI Digital Multi-Indicator
    VW Digital indicator for VW sensors
    • Code format : DIGIANGLE - [Series]
    • Optional
      • Harness (VW 3ch + Temp. 1ch)

     

     

     

    Notes

    • Please refer to the wiring method and use it after correct wiring and wiring.
    • For stable use of the product, please check the state of charge of the battery.
    • 12 months warranty is provided after released. Warranty provided only in case of using for designed purpose correctly.
    • The housing color can be changed according to the circumstances of the manufacturer and has nothing to do with the performance of the product.
    • Specifications, design and components can be changed without prior notice to improve its performances.

     

     

     

     

     

    Copyright ⓒ 2018 (주)다스. All rights Reserved