DAS -

제품정보

종합 제품 카탈로그

Support static electric and vibrating wire sensors

Wired and wireless data logging by various communicating method

Internal ESD, over-voltage and thunderbolt protection circuit

Easy and convenient to use, Excellent cost-effectiveness

Static data logger DPRO series 3 is a data measuring and logging device to measuring electric and vibrating wire sensor such as inclinometer, loadcell, strain gauge, thermistor. Connecting with wireless modem device and PC, measuring and logging can be remotely and adding multiplexer DPRO3-MUX to the logger, its logging channels will be extended.

다운로드

DPRO3

DPRO3 Specification

Item	Specification
Sensor Types	Diff.Vdc output sensor Single-ended Vdc (0-5V) output sensor Single-ended Vdc (0-10V) output sensor 4-20mA output sensor Full-bridge sensor VW (Vibrating Wire) sensor Thermistor (3K) RTD (PT-100) etc.
Channels	Default mode 10 channel Multi mode 30 channel
Power Source	11 ~ 30Vdc
Current Drain	Average <70mA at 12Vdc in standby Average <130mA at 12Vdc inoperating
Power Supply	DC +12V, +5V, +2V
Memory	Up to 8Gb
A/D Resolution	16-bit
Multiplexer	RS232, RS485
Operating Temp.	-30℃ ~ +80℃
Strorage Temp.	-40℃ ~ +85℃
Dimensions	W212.6 x D85 x H61.5㎜
Weight	760g
Housing	Steel

DPRO3 Layout

1		LED indicator
2		Ground connection
3		Power source
4		Relay output
5		+12V, +5V power supply
6		Multiplexer connection
7		RS232 D-SUB port
8		RS485 port
9		Sensor channels
10		Logger ID setting switch

DPRO-MUX

DPRO-MUX Specification

Item	Specification
Sensor Types	Diff.Vdc output sensor Single-ended Vdc (0-5V) output sensor Single-ended Vdc (0-10V) output sensor 4-20mA output sensor Full-bridge sensor VW (Vibrating Wire) sensor Thermistor (3K) RTD (PT-100) etc.
Channels	Default mode 10 channel Multi mode 30 channel
Power Source	11 ~ 30Vdc
Current Drain	<70mA @12Vdc
Power Supply	DC+12V, +5V, +2V
Operating Temp.	-30℃ ~ +80℃
Dimensions	W212.6 x D85 x H61.5㎜
Weight	673g
Housing	Steel

DPRO-MUX Layout

1		LED indicator
2		Ground connection
3		Power source
4		Relay output
5		+12V, +5V power supply
6		Data logger connection
7		Sensor channels
8		MUX ID setting switch

PC Software - DMS300, DMS300-TCP

Support connecting to PC by wired and wireless connections

Programming and executing to logging and measuring

Real time data checking and downloading

Notes

Please refer to the attached user manual for details on how to connect the sensor and how to create a data collection program.

Refer to the wiring method and use it after correct wiring and wiring.

For stable data collection, it is recommended to use it in a safe environment.

For the protection of data loggers, multiplexers and sensor devices, use with a stable constant voltage is recommended.

Be careful as there is a risk of damage to the product when using a non-standard power supply.

12 months warranty is provided after released. Warranty provided only in case of using for designed purpose correctly.

Specifications, design and components can be changed without prior notice to improve its performances.