제품정보

DIGIANGLE-VW Technical Datasheet
  •  
    • DIGIANGLE-VW Technical Datasheet
  •  
  •  
  • Power supplying for sensors to convenient use
  • VW sensors 3 channels + thermistor 1 channel at once
  • High strength aluminium housing
  • Low-power LCD display and automatic power saving
  •  
  •  
  •  Digital indicator DIGIANGLE-VW is for measuring VW-type of sensors such as loadcell, piezometer, strain gauge, vibrating-wire sensor.

    • 다운로드

    General Specifications

    Item Specifications Remark
    Measuring Range 450 ... 6,000Hz  
    Channels 3x VW + 1x Thermistor  
    Resolution 0.01% / 0.1 celsius  
    Non-Linearity 0.01% FS  
    Sampling Rate up to 25Hz  
    Battery 3.7V 500mAh (Li-ion)  
    Recharger USB 5V 500mA  
    Operating Temp. 0 ... +65 celsius  
    Dimensions W110 x H80 x D32mm  
    Weight 430g  
     
    • Temperature channel : Thermisotr 3Kohms


     

    Measuring Modes

    • MODE [A]
      = Hz (450...6,000Hz bandwidth)

    • MODE [B]
      = Hz^2 x 10^-3 (1,200...3,500Hz bandwidth)
       
    • MODE [C]
      = Hz^2 x 10^-3 x 4.062 (450...1,000Hz bandwidth)
       
    • MODE [D]
      = Hz^2 x 10^-3 x 3.304 (450...1,000Hz bandwidth)
       
    • MODE [E]
      = Hz^2 x 10^-3 x 0.39102 (1,000...3,500Hz bandwidth)

    Instructions


     
    A
    		   Push △ button to change 1-channel- measurement or 3-channels-measurement.
    B
    		   Push □ button long to power on and off. Push it short to measure.
    C
    		   Push ▽ button to change mode [A] to [E].
     
    • Push △ and ▽ buttons at once long to turn LCD backlight on and off.
     
    1
    		   Shows current channel number.
    2
    		   Shows current value of the channel. shows 3-channels-measurement.
    3
    		   Shows current measuring mode.
    4
    		   Shows battery status. C mark is appeared during recharging.
    5
    		   Shows measured temperature from the channel.
    6
    		   Shows the result from the channel or average value at 3-channels-measurement.
     
    • Measures automatically every 3 seconds after the powered on.
    • Power saving : Over 3 minutes without any command then power is off automatically.


    Wiring Connections

    Color Description
    RED CH 1
    GREEN CH 2
    BLUE CH 3
    YELLOW TEMP.
    BLACK COM
    		 

    Ordering Code

     
    1D Digital Protractor
    MULTI Digital Multi-Indicator
    VW Digital Indicator for VW sensors
    • Format : DIGIANGLE - [MODEL]

    • Options
      • Harness for DIGIANGLE-VW


    Recharging

    Recharge DIGIANGLE through the USB port on the rear by connecting USB-A to A cable (provided basically) to PC or USB recharger.

     

    Accessories

    • Leather pouch with shoulder strap
    • USB-A to A cable (2.0m)

    NOTES

    • Check wiring connections and battery status before use.
    • Color of the aluminium housing can be changed without prior notice. (unrelated to performance or quality)
    • 12 months warranty is provided after released. Warranty provided only in case of using for designed purpose correctly.
    • Specifications, design and components can be changed without prior notice to improve its performances.

    Copyright ⓒ 2018 (주)다스. All rights Reserved