제품정보

DWSmini Technical Datasheet
  •  
  • DWSmini Technical Datasheet
  •  
  •  
  • Voltage divider circuit consisted by potentiometers
  • Nylon coated stainless steel wire
  • Compact-size for easy to design and installation
  • High strength plastic housing for using in rough environments
  •  
  •  
  •  DWSmini is draw wire distance sensor that mount high precise potentiometer with compact-size outer housing. DWSmini is mainly applied for sensing and measuring length of outrigger of heavy equipments and special vehicles by its compact-size, waterproof and high strength housing design.
  • General Specifications

    Item Specification Remark
    Max. Length 1.5m / 2m / 3m  
    Potentiometer 500 ... 4,000 ohm  
    Voltage Output 10 ... 80% of Power Source  
    Power Source 5 ... 30VDC  
    Non-Linearity 0.25% FS  
    Repeatability below 10 mm  
    Wire Material Nylon coated Stainless steel  
    Thickness ø1.0  
    Durability over 20,000 times  
    Operating Temp. -20 ... +70 celsius  
    Dimensions W65 x H65 x D40mm  
    Weight 150g  
    Connector Delphi 1216-2833  

    Data Descriptions for Voltage output



      • Output V Range : 80% - 10% of Power source


    • e.g. Max. Length 3m, 12V power source, Output 7V,







    Wiring Connections

    • DWSmini is designed for Delphi 1216-2833 plug. Harness can be ordered optionally for wiring.

    • Output Color Description
      Single RED V+
      BLACK GND (COM)
      GREEN Output+
      Dual WHITE NC

    Ordering Code

    • Format : DWSmini- [1] - [2] - [3]

    • [1] Max. Length 15
      20
      30
      1.5m
      2m
      3m
      [2] Output
      D
      N/A is single output
      Dual output
      [3] Direction L
      R
      Drawing from the Left
      From the Right

      e.g. DWSmini-15-R / DWSmini-30-D-L

    • Options
      • Plug Harness : Delphi 1216-2833
      • DSC420-DWS : 4...20mA output converter


    NOTES

    • DWS is designed for operating at low speed wire drawing condition. It may behind its durability if high speed drawing is repeated.
    • Immoderate drawing may cause damages of internal spring and wire.
    • Check wiring connections before use.
    • 12 months warranty is provided after released. Warranty provided only in case of using for designed purpose correctly.
    • Specifications, design and components can be changed without prior notice to improve its performances.
     

    Copyright ⓒ 2018 (주)다스. All rights Reserved