제품정보

DPRO3 Instruction Manual
  •  
  • DPRO3 Instruction Manual
  •  
  •  
  • Support static electric and vibrating wire sensors
  • Wired and wireless data logging by various communicating method
  • Internal ESD, over-voltage and thunderbolt protection circuit
  • Easy and convenient to use, Excellent cost-effectiveness
  •  
  •  
  •  Static data logger DPRO series 3 is a data measuring and logging device to measuring electric and vibrating wire sensor such as inclinometer, loadcell, strain gauge, thermistor. Connecting with wireless modem device and PC, measuring and logging can be remotely and adding multiplexer DPRO3-MUX to the logger, its logging channels will be extended.
  • General Specifications

    Item Specification
    Sensor Types
    • Differential Vdc output sensor
    • Single-ended Vdc (0-5V) output sensor
    • Single-ended Vdc (0-10V) output sensor
    • 4-20mA DC current output sensor
    • Full-bridge sensor
    • VW (Vibrating Wire) sensor
    • Thermistor (3K)
    • RTD (PT-100)
    Channels
    • 10x Diff. Vdc, Full-bridge, Thermistor
    • 30x Single-ended Vdc, VW, mA
    Power Source 15 ... 30VDC
    Current Drain
    • <60mA in idle mode
    • <130mA in active mode
    Power Supply +12V, +5V, +2V
    Memory Internal SD-card 16GB
    A/D resolution 16-bit
    Multiplexer Connecting with RS485
    Wireless CDMA, 4G LTE modem
    Operating Temp. -20 ... +70 celsius
    Dimensions W212.6 x D85 x H61.5㎜
    Weight 760g
    Housing Steel / Aluminium

    Layout



    1
    LED indicator
    2
    Ground connection
    3
    Power source
    4
    Relay output
    5
    +12V, +5V power supply
    6
    Multiplexer connection
    7
    RS485 port
    8
    RS232 D-SUB port
    9
    Sensor channels
    A
    Dip S/W for ID setting




    PC software - DPROWin-DAQ

    • Support connecting to PC by wired and wireless connections
    • Programming and executing to logging and measuring
    • Real time data checking and downloading

    NOTES

    • Please be well-acquainted with whole instruction manual before use.
    • To stable data logging, room temperature (steady temperature) and low humidity environments are recommended.
    • In case of operating in low voltage or high temperature environments may cause degradation of relay performance and it causes delay of data logging.
    • Ground connection is recommended in noise occurred environment.
    • Check wiring connections before use.
    • 12 months warranty is provided after released. Warranty provided only in case of using for designed purpose correctly.
    • Specifications, design and components can be changed without prior notice to improve its performances.

    Copyright ⓒ 2018 (주)다스. All rights Reserved