제품정보

JSENS-IN Technical Datasheet
  •  
  • JSENS-IN Technical Datasheet
  •  
  •  
  • High performance MEMS based inclinometer (tilt sensor)
  • Perfectly applicable with CANopen and SAE-J1939
  • Micro-Processor mounted for stable sensing and data processing
  • Customized specifications for applying various industry areas
  • CE / ROHS
  •  
  •  
  •  To respond CAN that becoming mainstream communication standard for mobile vehicles, new-generation sensor series which perfectly applicable for CANopen and SAE-J1939 are now released. Introduce the series of high reliable CANbus sensors exceed performances of current analog and serial communication.
  • Specifications

    Item Specification Remark
    Measuring
    Range
    Uniaxial ±180˚ Settable
    Biaxial ±90˚ Settable
    Accuracy 0.1˚  
    Non-Linearity 0.25% FS  
    Response <0.3sec 10deg/sec
    Output
    Interval
    10msec  
    Output CANopen
    SAE-J1939
     
    Power Source 10 ~ 30Vdc  
    Current
    Consumption
    <60mA @12Vdc
    Operating
    Temp.
    -20℃ ~ +85℃  
    Waterproof IP66  
    Dimensions W40 x D40 x H16㎜ without mounting
    Weight 40g  
    • Measuring Range
      e.g. -90˚ ~ +90˚ or -30˚ ~ +60˚ etc.
    •  

    • The minimum/maximum angle must satisfy each axis' designated range.
      Please inquire separately for less than -3° ~ +3° (deg)
    •  

    • ±90° (deg) specification, the error range increases at angles exceeding ±85° (deg).

     

     

     

    Wiring Connections

    Axis Color Analog CANbus
    Uniaxial RED V+
    BLACK GND (COM)
    GREEN X+ CAN H
    Biaxial WHITE Y+ CAN L
    • JSENS series is designed for Delphi 1216-2833 plug. Harness can be ordered optionally for wiring.
    •  

    • Uniaxial doesn't use the white wire.

     

     

     

    Analog Data Descriptions

    • Deg. from Analog - Vdc output
      • Measuring Range : max range - min range
      • Output V Range
        =4.5V - 0.5V = 4V
      • Zero Offset = 2.5V

       

    • e.g. Measuring range ±90°, Output 3.5V,

     

     

     

     

    Sensing Directions

    X-axis, Floor Mount X-axis, Wall Mount
    Y-axis, Floor Mount Y-axis, Wall Mount
    • Above images show sensing directions of JSENS-IN.

     

     

     

    CAN Protocol

    • Bitrate : 500 kbps
    •  

    • Transmit Interval : 10㎳
    •  

    • Transmit Start : Automatically
    •  

    • Default COB ID (HEX) : 0x0A
    •  

    • Output data includes only angular data.
    •  

    • Refer each protocol manual for CANopen and SAE-J1939.

     

     

     

    Ordering Code

    Axis S
    D
    Uniaxial
    Biaxial
    Output CO
    CJ
    CANopen Protocol
    SAE-J1939 Protocol
    Range Set measuring mount
    Attachment
    Direction
    F
    W
    Floor mount
    Wall mount
    Rotational
    Direction
    C
    NC
    Terminating Resistance (default)
    Non-Terminating Resistance
    • Code format : JSENS-IN-[①]-[②]-[③]-[④]-[⑤]
      e.g. JSENS-IN-S-CO-180-F-C
    •  

    • Optional
      • Plug harness: Delphi 1216-2833
      • COB ID : Settable within HEX 201~27F

       

    • Termination resistance applies only to CAN communication specifications./li>

     

     

     

    Notes

    • Specification changes after shipment will be charged for a fee, so be sure to order with the correct specifications.
    •  

    • Ground connection is recommended in noise occurred environment.
    •  

    • MEMS based inclinometer (tilt sensor) measure tilt (degree) by gravity. Check sensing directions before use.
    •  

    • Check wiring connections before use.
    •  

    • 12 months warranty is provided after released. Warranty provided only in case of using for designed purpose correctly.
    •  

    • Specifications, design and components can be changed without prior notice to improve its performances.

     

     

     

     

     

    Copyright ⓒ 2018 (주)다스. All rights Reserved