DAS -

제품정보

High-precise, High-performance MEMS inclinometer

Applicable for industries and engineerings which precise measurement, high-stability and reliability are necessary.

Micro-processor mounted for stable sensing and data processing.

Utilizing as EL-BEAM sensor by combining with aluminum-profile.

Q-mark / Certificate of State Registration (Russia)

Inclinometer CUBE is a high-precise, high-performance inclino- meter specialized in civil engineering, geotechnical engineering and geostructural monitoring. CUBE is widely applicable for industries which precise measurement is necessary such as measuring movement of bridge, structures and constructions, measurnig ground deformation due to tunneling or boring.

다운로드

Specifications

General

Item	Specification	Remark
Measuring Axis	Uniaxial or Biaxial
Measuring Range	+/-1 ... +/-15 deg
Resolution	0.0013 deg
Non-Linearity	0.38% FS
Temp. Drift	＜0.05 deg per celsius
Response	＜0.5sec
Output	-2 ... +2 Diff.Vdc 4 ... 20mA	differential
Power Source	12Vdc 24Vdc	@ Diff.Vdc @ mA
Current Consumption	＜100mA	@12Vdc
Operating Temp.	-20 ... +85 celsius
Waterproof	IP65
Dimensions	W65 x D65 x H55mm
Weight	500g
Cables	Shielded 6C, PU, 300cm

Dimensions are without mounting.

2 wires-mA output

Item	Specification	Remark
Measuring Range	+/-1 ... +/-30 deg
Resolution	0.0025 deg
Output	4 ... 20mA	2-wires

Cold-proof

Item	Specification	Remark
Current Consumption	＜1A	@12Vdc
Operating Temp.	-45 ... +85 celsius
Weight	600g

General : Set freely within +/-1 ... +/-15 deg
e.g. -3 ... +3 deg / -5 ... +5 deg
2 wires-mA : Set freely within +/-1 ... +/-30 deg
Cold-proof CUBE is recommended with permanent power source as the internal heating device consumes large current.

Wiring Connections

Check wiring connections regarding each types of output.
GND is COM with mA-output.

Color	Diff.Vdc	mA	2 wires
RED	V+		X+
BLACK	GND (COM)		X-
GREEN	X+	X-axis	Y+
WHITE	X-	Y-axis	Y-
BLUE	Y+
PURPLE	Y-

Sensing Directions

To convert Floor/Wall mounting, change attaching position of the mounting bracket to the bottom surface or the side surface of the sensor.
Check the label of the sensor to identify exact sensing directions.

X-axis	Y-axis

Data Descriptions

Deg. from Diff. Vdc output

Measuring Range : max range - min range
Output V Range : +2V - (-2V) = 4V

e.g. Measuring Range +/-10 deg, Output -1V,

Deg. from mA output

Output mA Range : 20mA - 4mA = 16mA
Zero Offset : 12mA

Ordering Code

Format : CUBE - [1] - [2] - [3] - [4] - [5]

[1]	S D	Uniaxial Biaxial
[2]	MV MA MA2	-2...+2Vdc output 4...20mA output 2 wires 4...20mA output
[3]	Set measuring range
[4]	F W	mounting direction of [Floor] mounting direction of [Wall]
[5]	LT	Cold-proof (optional)

e.g. CUBE-D-MV-3-F

Options

Cable length : additional cost per meter
Tripod mounting and EL-BEAM (1m/2m/3m)

INSTALLATIONS

CUBE	Default Mounting

Tripod (optional)	EL-BEAM (optional)

NOTES

Ground connection is recommended in noise occurred environment.
MEMS based inclinometer (tilt sensor) measure tilt (degree) by gravity. Check sensing directions before use.
Check wiring connections before use.
12 months warranty is provided after released. Warranty provided only in case of using for designed purpose correctly.
Specifications, design and components can be changed without prior notice to improve its performances.